Verkada Overview | Verkada › Cameras

Verkada Camera Installer in Southern California

WCC Technologies Group is a certified Verkada camera installer serving Southern California — deploying Verkada's cloud-managed security cameras for enterprises, school districts, healthcare facilities, government agencies, and commercial real estate across Los Angeles, Orange County, the Inland Empire, Riverside, San Diego, and Ventura County.

What Is Verkada

Cloud-Managed Security Cameras — No NVR, No Server

Verkada security cameras combine built-in edge storage with a cloud-managed dashboard — cameras record locally to onboard storage and are managed through Verkada Command, a centralized cloud platform. There is no NVR, DVR, or on-premises server required. Live view, playback, smart search, and health monitoring are all accessible from any browser or mobile device.

WCC deploys Verkada for enterprises requiring fast multi-site camera deployment, school districts needing district-wide visibility from a single dashboard, healthcare facilities requiring HIPAA-aligned camera management, government agencies and commercial real estate operators across Southern California. For Verkada access control, see our Verkada Access Control page.

What WCC Delivers

Camera Placement Design

Coverage maps, field of view analysis, mounting height, and model selection tailored to each area — designed before any hardware ships.

Physical Installation

Camera mounting, cabling, PoE switch installation, and network configuration — fully commissioned and tested at every camera before handoff.

Verkada Command Configuration

Site setup, camera onboarding, retention policies, motion alert zones, and user permissions — configured and validated in the Verkada cloud dashboard.

Network & PoE Planning

Dedicated camera VLANs, PoE switch sizing, and WAN bandwidth planning for cloud sync — so video traffic is isolated and cloud performance is predictable.

Smart Search & Alert Setup

Person, vehicle, and motion detection zones configured to your facility — alert routing set up for your security team's workflow from day one.

Admin Training & Runbooks

Live walkthrough with your security and IT team plus documented procedures for daily operations, clip sharing, evidence export, and camera health review.

Supported Hardware

Verkada Camera Models WCC Installs

WCC installs the full Verkada camera lineup — indoor, outdoor, PTZ, fisheye, multisensor, mini, and specialty devices across all form factors and coverage requirements.

Indoor

Indoor Dome Series

CD22 · CD32 · CD43 · CD53 · CD63

Outdoor Dome

Outdoor Dome Series

CD22-E · CD32-E · CD43-E · CD53-E · CD63-E

Outdoor Bullet

Outdoor Bullet Series

CB52-E · CB62-E · CB52-TE · CB62-TE

Mini

Mini Series

CM22 · CM42 · CM41-E

Fisheye

Fisheye Series

CF83-E

Multisensor

Multisensor Series

CY53-E · CY63-E · CH52-E · CH53-E · CH63-E

PTZ

PTZ Series

CP52-E · CP63-E

Specialty

Specialty Devices

CM42-S · CC300 · CC500 · CC700 · VX52 · CR63-E

Platform Capabilities

Verkada Command — Cloud Platform Capabilities

Verkada Command provides centralized camera management across all sites — live view, playback, smart search, clip sharing, health monitoring, and access control from a single cloud dashboard.

Centralized Multi-Site Dashboard

View live and recorded video from all Verkada cameras across all sites from a single cloud dashboard — no VPN, no NVR per site, no federated server configuration required.

Edge Storage — No NVR Required

Cameras record to onboard edge storage — no NVR or DVR required at any location. Storage is sized by camera model and retention setting, with no additional hardware to provision or maintain.

AI Smart Search

Person, vehicle, and motion-based search across all cameras — find relevant footage from any site in seconds without manually scrubbing hours of video.

Secure Clip Sharing

Share video clips with law enforcement, HR, or legal teams via secure links with configurable expiration — no physical media, no footage transfer process.

Camera Health Monitoring

Verkada Command surfaces camera health status, storage utilization, and connectivity alerts across all sites — proactive issue identification before coverage gaps occur.

Access Control Integration

Native integration with Verkada Access Control — door events linked to camera footage in a unified Command dashboard for rapid incident investigation.

Delivery Process

How WCC Deploys Verkada Cameras

From camera placement design through Verkada Command configuration, admin training, and ongoing support.

01

Site Assessment

Coverage mapping, mounting location review, lighting assessment, PoE switch planning, and WAN bandwidth modeling per site and camera count.

02

Design & BOM

Camera model selection per area, PoE switch spec, VLAN architecture, retention configuration, and full bill of materials with pricing.

03

Installation

Camera mounting and cabling, PoE switch installation, Verkada Command onboarding, and retention and alert zone configuration.

04

Validation

Full coverage verification, recording quality review, smart search testing, alert routing validation, and camera health confirmation.

05

Handoff & Support

Admin training on Verkada Command, runbook delivery, camera inventory documentation, and ongoing support including firmware lifecycle and health monitoring.

Service Area

Verkada Camera Installer — Southern California Service Area

WCC installs Verkada cameras across Southern California from our headquarters in Chino, CA — no travel fees within our primary six-county service area.

Los Angeles County

  • Los Angeles
  • Long Beach
  • Pasadena
  • Burbank & Glendale
  • El Segundo
  • Torrance
  • & more

Orange County

  • Irvine
  • Anaheim
  • Santa Ana
  • Newport Beach
  • Huntington Beach
  • Fullerton
  • & more

San Bernardino County

  • Chino
  • Ontario
  • Rancho Cucamonga
  • San Bernardino
  • Fontana
  • Redlands
  • & more

Riverside County

  • Riverside
  • Corona
  • Moreno Valley
  • Murrieta
  • Temecula
  • Palm Springs
  • & more

San Diego County

  • San Diego
  • Chula Vista
  • Escondido
  • Carlsbad
  • El Cajon
  • Oceanside
  • & more

Ventura County

  • Ventura
  • Oxnard
  • Thousand Oaks
  • Simi Valley
  • Camarillo
  • Moorpark
  • & more
FAQ

Verkada Camera Installer FAQs

Are you a certified Verkada installer in Southern California?
Yes. WCC Technologies Group is a certified Verkada partner — we design, install, and support Verkada cameras and access control throughout Southern California, serving Los Angeles County, Orange County, San Bernardino County, Riverside County, San Diego County, and Ventura County from our headquarters in Chino, CA.
How does Verkada camera storage work without an NVR?
Verkada cameras record continuously to onboard edge storage built into the camera — no NVR, DVR, or on-premises server is required. Storage capacity and retention duration vary by camera model. Live view, playback, and smart search are all accessible through the Verkada Command cloud dashboard from any browser or mobile device. WCC sizes camera model selection and retention settings to your coverage requirements and compliance obligations.
What Verkada camera models does WCC install?
WCC installs the full Verkada camera lineup including Indoor Dome (CD22–CD63), Outdoor Dome (CD22-E–CD63-E), Outdoor Bullet (CB52-E, CB62-E, CB52-TE, CB62-TE), Mini Series (CM22, CM42, CM41-E), Fisheye (CF83-E), Multisensor (CY53-E, CY63-E, CH52-E, CH53-E, CH63-E), PTZ (CP52-E, CP63-E), and Specialty Devices (CM42-S, CC300, CC500, CC700, VX52, CR63-E). Camera model selection is based on coverage area, lighting conditions, resolution requirements, and form factor.
Can Verkada cameras integrate with Verkada access control?
Yes. Verkada cameras integrate natively with Verkada Access Control through the unified Verkada Command dashboard — door events appear linked to camera footage, enabling rapid investigation of access-related incidents without switching between systems.
What happens to Verkada camera recording if the internet goes down?
Verkada cameras continue recording to onboard edge storage during internet outages — no footage is lost. Live remote viewing through Verkada Command is unavailable during an outage, but local recording continues uninterrupted. When connectivity is restored, cameras reconnect to the Command platform automatically.
Do you install Verkada cameras in the Inland Empire?
Yes. WCC installs Verkada cameras across the Inland Empire — serving enterprise campuses, warehouses, healthcare facilities, school districts, and government buildings in Chino, Ontario, Rancho Cucamonga, San Bernardino, Fontana, Redlands, Riverside, Corona, Murrieta, and Temecula. Our headquarters is in Chino, CA — no travel fees in the Inland Empire.
Get Started

Plan Your Verkada Camera Deployment

Tell us your sites, camera count estimate, and coverage requirements — we'll recommend the right Verkada models and provide a clear scope and cost estimate.

Scroll to Top