QSC (Q-SYS) Conference Room Installation & Support in Southern California
Hire a local QSC integrator to design and deploy conference rooms with Q-SYS Core processors, NV Series network video, Q-SYS Control & touch panels, plus networked audio, amplification, and loudspeakers—across Los Angeles, Orange County, San Diego, Riverside, and San Bernardino.
Why QSC / Q-SYS with WCC
Q-SYS provides a flexible, software-based platform for audio, video, and control—ideal for standardizing rooms at scale. We focus on predictable installs, clean cable management, and clear documentation so IT can operate rooms confidently.
Q-SYS Platform
Core processors for DSP, control, and integration with common UC platforms and peripherals.
- Core Nano / 8 Flex / 110f right-sizing
- Room I/O, USB bridging, and network endpoints
- Standardized project files & naming
Video, Control & Monitoring
NV Series video, Q-SYS Control & touch panels, and cloud monitoring for fleet visibility.
- Touch UI with presets & one-touch start
- Device control (displays, shades, lighting)
- Cloud alerts & inventory dashboards
Room Designs We Build
From huddle rooms to boardrooms, we size the Core, endpoints, amplification, and speakers; document standards; and make future rollouts repeatable.
Huddle (2–4)
Compact Core + USB ingest; simplified touch UI and auto-mute logic.
Small Rooms (4–8)
Core + NV video, table/ceiling mics; display control & auto-wake.
Medium Rooms (8–14)
Expanded I/O, mic arrays, dual displays; presets for different layouts.
Large / Boardroom
Distributed amps & zones; confidence monitors; advanced camera routing.
Divisible / Training
Room combine logic via control scripting; simple operator workflow.
BYOD & Hybrid
USB bridging and clear cable paths; safe power & device handoff.
Capabilities Matrix
Where QSC / Q-SYS typically fits. Final designs are tailored to your platform, standards, and spaces.
| Capability | Best Fit | Notes |
|---|---|---|
| DSP & Control | Q-SYS Core | Room processing, USB, plugins, logic & presets |
| Networked Video | Q-SYS NV Series | Encode/decode, routing, confidence monitoring |
| Room Control UI | Q-SYS Touch Panels | Simple presets, source select, device control |
| Amplification | QSC CX-Q / SPA | Efficient amps sized per zone & load |
| Loudspeakers | AcousticDesign | Consistent voicing for speech & program audio |
| Monitoring & Updates | Cloud Management | Inventory, health, notifications & remote support |
| Third-Party Integration | Plugins / APIs | Displays, mics, DSP, relays, lighting & shades |
How We Deliver
End-to-end delivery with documentation and clear handoff so your team is confident on day one.
1) Design & Plan
- Room surveys & platform alignment
- Core sizing, I/O map, mic & speaker coverage
- Drawings, BOM & install standards
2) Implement
- Mounting & cable paths; labeling & photos
- Core programming, presets, device control
- Validation tests & tuning (gain/EQ/routing)
3) Operate
- As-builts & admin runbooks
- Cloud monitoring & alerting setup
- Training for IT & key users
QSC / Q-SYS FAQs
Do you program Q-SYS Designer and integrate UC platforms?
Yes. We build project files with clear naming, presets, and logic; enable USB bridging for laptops where needed; and integrate room controls for common UC workflows.
How do you handle audio coverage and tuning?
We right-size mic and speaker counts, set gain structure, apply EQ and dynamics as needed, and verify coverage during commissioning with test playback and measurement.
Can you integrate third-party devices?
Yes—via Q-SYS plugins, GPIO/relays, RS-232, and IP control. Typical integrations include displays, microphones, lighting, shades, and occupancy sensors.
What about video routing and BYOD?
We use NV Series for networked video, define source/destination maps, and provide simple UI presets. For BYOD, we add USB ingest with clear cable paths and signage.
How are rooms monitored and updated?
We enable cloud monitoring where appropriate for inventory, status, and notifications, and document the update workflow for cores, panels, and endpoints.
What do we receive at handoff?
As-built drawings, project files, IP plans, port maps, labeled photos, and runbooks. We also deliver live admin walkthroughs and end-user training.